Preparing the panel:
Choose a cons-plated 5 to 8 mm thick-
take a sealer Trade (Catalogue for the building). To use follow directions mentioned on the package.
-Remove all wood particles and dirt before putting the sealer.
-applied coating very uniformly with a spatula in the vertical direction.
-Sand the surface with fine sandpaper (00), once dry
(about thirty minutes).
-write a second coating layer in the width direction.
-Sand again to get a perfectly smooth surface, then apply a layer of "gesso."
The surface of a complete smooth, drawing the subject.
The subject may be drawn in charcoal, or directly by brush soaked in turpentine. (He will fix the charcoal to avoid soiling of colors), the ink or permanent marker or see oil diluted in turpentine.
Drive following the execution as it would for a painting on canvas.
This technique offers the advantage of being closer to the ancient techniques of sizing, faster to implement, it can be glued wood panels most varied.
Sizing containing water, we must ensure that the support is dry before use, the paint layers that confine the water, would have serious consequences, blisters, and other well do not forget to glue the back to avoid any deformations.
One day drying acrylic paints or vinyl, 5 days for oil are preferable.
0 comments:
Post a Comment